316 Stainless Steel Deflector Cone to suit KGSDA & KGSHR series of Knife Gate Valves. Deflector cones are used when an abbrasive media is flowing through the Knife Gate valve to protect the internals from being damaged over time due to abbrasion, to prevent build up of media in the valve seat and to protect the body of the valve. As these Deflector Cones slide into place, they are able to be easily renewed at the end of their service life. The 316 Stainless Steel construction also allows for some mild corrosive medias to flow through these deflector cones (please refer to chemical compatibility chart for suitability).
DN | ØD | ØD2 | B | H | A | ØF |
---|---|---|---|---|---|---|
50 | 92 | 45 | 6 | 21 | 14 | 56 |
65 | 106 | 60 | 6 | 21 | 14 | 71 |
80 | 122 | 74 | 6 | 21 | 15 | 85 |
100 | 141 | 93 | 7 | 22 | 15 | 105 |
125 | 176 | 117 | 7 | 24 | 19 | 130 |
150 | 202 | 138 | 7 | 24 | 21 | 151 |
200 | 256 | 189 | 8 | 30 | 21 | 205 |
250 | 308 | 235 | 8 | 33 | 23 | 253 |
300 | 356 | 280 | 9 | 33 | 24 | 298 |
All dimensions in mm unless stated otherwise
316 Stainless Steel Deflector Cone to suit KGSDA & KGSHR series of Knife Gate Valves. Deflector cones are used when an abbrasive media is flowing through the Knife Gate valve to protect the internals from being damaged over time due to abbrasion, to prevent build up of media in the valve seat and to protect the body of the valve. As these Deflector Cones slide into place, they are able to be easily renewed at the end of their service life. The 316 Stainless Steel construction also allows for some mild corrosive medias to flow through these deflector cones (please refer to chemical compatibility chart for suitability).
DN | ØD | ØD2 | B | H | A | ØF |
---|---|---|---|---|---|---|
50 | 92 | 45 | 6 | 21 | 14 | 56 |
65 | 106 | 60 | 6 | 21 | 14 | 71 |
80 | 122 | 74 | 6 | 21 | 15 | 85 |
100 | 141 | 93 | 7 | 22 | 15 | 105 |
125 | 176 | 117 | 7 | 24 | 19 | 130 |
150 | 202 | 138 | 7 | 24 | 21 | 151 |
200 | 256 | 189 | 8 | 30 | 21 | 205 |
250 | 308 | 235 | 8 | 33 | 23 | 253 |
300 | 356 | 280 | 9 | 33 | 24 | 298 |
All dimensions in mm unless stated otherwise
316 Stainless Steel Deflector Cone to suit KGSDA & KGSHR series of Knife Gate Valves. Deflector cones are used when an abbrasive media is flowing through the Knife Gate valve to protect the internals from being damaged over time due to abbrasion, to prevent build up of media in the valve seat and to protect the body of the valve. As these Deflector Cones slide into place, they are able to be easily renewed at the end of their service life. The 316 Stainless Steel construction also allows for some mild corrosive medias to flow through these deflector cones (please refer to chemical compatibility chart for suitability).
DN | ØD | ØD2 | B | H | A | ØF |
---|---|---|---|---|---|---|
50 | 92 | 45 | 6 | 21 | 14 | 56 |
65 | 106 | 60 | 6 | 21 | 14 | 71 |
80 | 122 | 74 | 6 | 21 | 15 | 85 |
100 | 141 | 93 | 7 | 22 | 15 | 105 |
125 | 176 | 117 | 7 | 24 | 19 | 130 |
150 | 202 | 138 | 7 | 24 | 21 | 151 |
200 | 256 | 189 | 8 | 30 | 21 | 205 |
250 | 308 | 235 | 8 | 33 | 23 | 253 |
300 | 356 | 280 | 9 | 33 | 24 | 298 |
All dimensions in mm unless stated otherwise