Features:
Size F04 to F16
Body 304 Stainless Steel
Function Adaptor Brackets for Valves/Actuators
These brackets are made from folded 304 Stainless Steel and allow for different size mounting interfaces (according to ISO5211). This is sometimes needed where the valve and actuator have different mounting interfaces so direct mounting is not an option. A drive dog would also be used to adapt the shaft.
If you need a reference to the ISO Mounting Dimension standard. It can be found here.
Model | A | B | C | ØD | ØE | F | G | ØH | ØI |
---|---|---|---|---|---|---|---|---|---|
BKT1 | 57 | 50 | 38 | 36 | 50 | 3 | 12 | 6.5 | 7.5 |
BKT2 | 74.5 | 65 | 40 | 42 | 70 | 3 | 16 | 6.5 | 9.5 |
BKT3 | 125 | 110 | 70 | 70 | 125 | 4 | 30 | 9.5 | 15 |
BKT4 | 165 | 150 | 100 | 102 | 140 | 6 | 45 | 12 | 18.5 |
BKT5 | 195 | 180 | 140 | 102 | 165 | 8 | 45 | 12 | 22 |
Size F04 to F16
Body 304 Stainless Steel
Function Adaptor Brackets for Valves/Actuators
Size F04 to F16
Body 304 Stainless Steel
Function Adaptor Brackets for Valves/Actuators
These brackets are made from folded 304 Stainless Steel and allow for different size mounting interfaces (according to ISO5211). This is sometimes needed where the valve and actuator have different mounting interfaces so direct mounting is not an option. A drive dog would also be used to adapt the shaft.
If you need a reference to the ISO Mounting Dimension standard. It can be found here.
Model | A | B | C | ØD | ØE | F | G | ØH | ØI |
---|---|---|---|---|---|---|---|---|---|
BKT1 | 57 | 50 | 38 | 36 | 50 | 3 | 12 | 6.5 | 7.5 |
BKT2 | 74.5 | 65 | 40 | 42 | 70 | 3 | 16 | 6.5 | 9.5 |
BKT3 | 125 | 110 | 70 | 70 | 125 | 4 | 30 | 9.5 | 15 |
BKT4 | 165 | 150 | 100 | 102 | 140 | 6 | 45 | 12 | 18.5 |
BKT5 | 195 | 180 | 140 | 102 | 165 | 8 | 45 | 12 | 22 |
Size F04 to F16
Body 304 Stainless Steel
Function Adaptor Brackets for Valves/Actuators
These brackets are made from folded 304 Stainless Steel and allow for different size mounting interfaces (according to ISO5211). This is sometimes needed where the valve and actuator have different mounting interfaces so direct mounting is not an option. A drive dog would also be used to adapt the shaft.
If you need a reference to the ISO Mounting Dimension standard. It can be found here.
Model | A | B | C | ØD | ØE | F | G | ØH | ØI |
---|---|---|---|---|---|---|---|---|---|
BKT1 | 57 | 50 | 38 | 36 | 50 | 3 | 12 | 6.5 | 7.5 |
BKT2 | 74.5 | 65 | 40 | 42 | 70 | 3 | 16 | 6.5 | 9.5 |
BKT3 | 125 | 110 | 70 | 70 | 125 | 4 | 30 | 9.5 | 15 |
BKT4 | 165 | 150 | 100 | 102 | 140 | 6 | 45 | 12 | 18.5 |
BKT5 | 195 | 180 | 140 | 102 | 165 | 8 | 45 | 12 | 22 |