PTFE Adhesive Joint Sealant

Full spool (5m length) of PTFE Joint Sealant is made from 100% expanded PTFE. It is white with self-adhesive backing. It is marshmallow like with square or oval cross section. When compressed, the sealant forms a thin yet strong and durable gasket that is highly resistant to creep and cold flow. Installation is no longer a tough job, just peel off the adhesive backing, apply to the flange surface and overlap the ends. It is far more efficient than cutting from gasket sheets. It is suitable for all industries including the food and pharmaceutical industries.

PTFE Joint Sealant can be applied to the surface of the flanges easily even when the surface is not smooth. It minimizes the potential for leak and reduces the maintenance time, safety risks and the possibility of failure.

Technical Data
Tensile Strength	2000 PSI (ASTM F-152)
Compressibility	55-80% (ASTM F-36)
Sealability	0.13 ml/hr (ASTM F-37-B [ 30psig/2 bar-air])
Sealability	M=1.5 ; Y=2,500 PSI
Creep Relaxation	40% (ASTM F-36)

Thickness 1.5mm - 5mm
Width 3.2mm - 50mm
Length 5m
Temperature 260°C
pH 0 - 14

PTFEADH

Features:

Thickness 1.5mm - 5mm
Width 3.2mm - 50mm
Length 5m
Temperature 260°C
pH 0 - 14

Description:

Technical Data
Tensile Strength	2000 PSI (ASTM F-152)
Compressibility	55-80% (ASTM F-36)
Sealability	0.13 ml/hr (ASTM F-37-B [ 30psig/2 bar-air])
Sealability	M=1.5 ; Y=2,500 PSI
Creep Relaxation	40% (ASTM F-36)

WARNING

These products are intended for use in industrial applications only. Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’ and in our individual ‘Series’ data sheets. Before using these products with fluids other than these specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult PCIPro Through misuse, age, or malfunction, components used in industrial valve applications can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in industrial valve applications and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to the user in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings or specifications found in instruction sheets or labels packed or attached and shipped with the products. Our policy is one of continuous research and development. We therefore reserve the right to amend without notice the specifications given in this document or our individual ‘Series’ data sheets.

WARRANTY INFORMATION

All valve series and other products manufactured or distributed by PCIPro are warranted by PCIPro to be free of defects in material and workmanship for a period of 1 year from the date of purchase or as the manufacturer warrants. PCIPro obligation under this warranty is limited to repair or replacement of the defec1ive product or refund of the purchase price paid solely at the discretion of PCIPro and provided such defective product is returned to PCIPro freight prepaid and upon examination by PCIPro such product is found defective. This warranty shall be void in the event that the product has been subject to misuse, misapplication, improper maintenance, modification or tampering. This warranty is expressed in lieu of all other warranties, expressed or implied from PCIPro representatives or employees. PCIPro reserves the right to change Valve and Brochure specifications without notice.